x
Send Your Inquiry Today

Cooling System for Die Casting Mold

cooling during die casting productionThe generation of significant heat to cause a rise in temperatures is a flagship feature of die casting. Still, excessive heat is always detrimental to the capabilities of mechanical production. So, keeping the heat under control occupies a considerable space in die casting process.

Manufacturers implement different approaches to maintain an advantageous thermal environment. And it all starts with the cooling system integrated into the casting mold. It’s essential to understand the why and the what of the die casting cooling system used for the metal box.

What is A Casting Mold Cooling System?

Channels and Passages in Die Casting Mold to Dissipate Heat

It’s an interconnected and/or interdependent network of various heat-dissipating channels and passages. A cooling system enables consistent, systematic, controlled removal of heat during die casting processes. The series of passages or channels required for cooling is either drilled or machined into casting molds.

The standard design puts the channels along the mold contours to achieve the desired temperatures. A complex design will require an intuitive placement of passages at potential heat buildup points. The die casting cooling system grants the coolant, oil/water, to enter and circulate throughout the mold to dissipate heat.

Methods Used to Cool Down Casting Mold

Based on the coolant used, there are two well-defined systems applied in the die-casting industry:

  1. Air Cooling System:As the name suggests, it utilizes or relies on airflow to cool down the molten metal. Only a few suitable cases are available to afford air cooling from the commercial perspective. It’s because the cooling takes a longer time, heats up the adjacent space, and provides minimal control.
  2. Fluid Cooling System:It’s the primary cooling system across the industry. The simplest fluid readily used features a mixture of water with ethylene glycol. The latter secures the passages from rusting, where some specific oils can perform a similar function. It exclusively helps to control the mold temps.

Systematic Diagram of Die Cast Fluid Cooling System

Importance of Cooling for Die Casting Mold

  • Every die casting process must feature a well-functioning cooling system. It’s because the molten metal must lose heat to a sufficient level. Otherwise, it’s impossible to gain the desired texture, properties, and quality for the die cast.
  • Maintaining a balanced, favored, consistent temperature across the injected liquid metal is also crucial. Even the slightest deviation can lead to multiple product-hampering defects like warping, cracks, and/or shrinkage during solidification.
  • Reduced cycle time is another magnificent advantage of implying a proper die casting cooling system. A speedy casting means more injection; meaning extra productivity. Even a few extra seconds can cost big bucks in production.
  • Also, keeping equipment as well as the manufacturing place cool is associated with the system. Air cooling isn’t preferable since it dangerously heats up the place. Highly heated equipment loses its steadfast functionality rather quickly.

Cooling Rate vs Cooling Time in Casting

It’s not uncommon to treat two essential terms, ‘cooling rate’ and ‘cooling time’, use alternatively. They are certainly related to mold cooling systems in die casting. But the two are notably different from one another to a significant extent.

Cooling System for Metal Die Casting

  1. Cooling Rate determines how rapidly the injected liquid metal cools down to form a solid. It concerns the solidification of the molten metal, usually expressed in seconds. It’s an incredibly fast process, requiring absolute control over the heat dissipation.
  2. Cooling Time is the total time estimated, taken, required to craft the intended die casting product. The time ranges from the initial injection of liquid metal to the final ejection of the solid part. The cooling rate is more like a decisive part of cooling time.

High priority is given to the cooling rate in the modern die casting process as it depends on many vital facts. Mold temps, flow rate, injection pressure, and thermal conductivity directly take part in influencing the rate. It often takes mere seconds for small and/or simple parts which surely extends to complex ones.

What Factors Affect Mold’s Cooling System?

The perfect functionality of a cooling system designed for die casting molds concerns various factors. Every single fact is essential to ensure the others’ proper collaboration in the network. These must-consider points to affect are:

  • Difference in Temperatures: A greater temperature difference between the casting mold with the adjacent place has a direct effect on cooling. A higher difference initiates faster dissipation whereas it takes extra time with a close distinction.
  • Thermal Conductivity of Mold and Metal: Thermal conduction of the metal as well as the mold plays an equally important role in heat reduction. A steady conductivity, neither too high nor too low, helps the heat to dissipate via cooling channels.
  • Dimensional Complexity: A complex shape often features narrow spaces where heat gets trapped. It takes additional time for the heat to come out for removal. But a simplified geometry enables speedy and uniform removal from the casting.
  • Available Internal Surface Area: More surface area at the internal side of molds gives more space for dissipation. Thermal conductivity becomes more active and obvious in such cases. But it’s not always possible to provide such a large surface.
  • Properties of Metal Alloy: Metal properties, particularly the ones related to heat, also influence cooling. Some alloys absorb fast but release slowly; some metals absorb slowly but release fast; and some metal alloys hold a balanced action.
  • Surrounding Environment: It includes the heat condition of the working place as well as the operating equipment. An already heated surrounding will eventually cause a retarded cooling rate. So, it’s a must to keep the surrounding things cool.
  • Heat Transferring Medium: The coolant to take away the heat from the system has great significance. As mentioned already, water initiates a much faster cooling than air. And specific mixtures as well as alternatives are available for water.

Common Devices for Increased Cooling Efficiency

Passages and/or Channels are the primary mediums to use the coolant for heat dissipation. However, modern complexity in geometric consistency often seems too much for the standard measures. That’s where exclusive devices are available to aid the situation. These would be:

  1. Baffle:It’s a channel drilled perpendicularly into the main heat-dissipating line. An internal built-in blade keeps the passage separated, featuring two semi-circular paths. It’s an economic solution to cool down tight spaces by incorporating extra surfaces.
  2. Thermal Pin:It’s a sealed cylinder filled with a specific fluid, designed to vaporize upon drawing heat. Then it transfers the heat to the primary coolant to become fluid again. Its efficiency is notably high, making thermal pins suited for extreme cases.
  3. Bubbler:It’s a small tube to lets the coolant enter and exit from the ends, entering the coolant line. A bubbler is the best device for casting with limited thickness. Slender molding cores in modern casting methods readily implement this device.

Baffle and Bubble are similar in type, integration, and mechanism. They feature limited coolant flow due to considerable internal flow resistance. Extra caution is required while adding such assistive devices.

Why Jet Cooling is the Best for Die Casting?

Jet Cooling is a well-favored cooling system for modern die casting approaches. It features a hydraulic pump alongside a pneumatic distributor. The pump circulates pressurized water as the coolant for a specific time. Then the distributor injects air to remove the presence of residual water.

Jet Cooling exclusively helps die casting of non-ferrous metals to overcome thermal fatigue. The risks of porosity and shrinkage are lower with a reduced cycle time. Even the productivity increases with reduced amounts of scraps. The overall durability, quality, and performance reach a new height.

Sunrise Casting, an aluminum die-casting manufacturer from China, excels in the industry with state-of-the-art methods. Our experts with 10+ years of experience are ready to employ the best cooling systems based on your project specs. Reach out for professional consultation through Contact.

Scroll to Top